Scope

final case class Scope[F[_], A, B](acquire: F[A], use: (A) => F[Iterant[F, B]], release: (A, ExitCase[Throwable]) => F[Unit]) extends Iterant[F, B] with Product with Serializable

The Scope state of the Iterant represents a stream that is able to specify the acquisition and release of a resource, to be used in generating stream events.

Scope is effectively the encoding of Bracket, necessary for safe handling of resources. The use parameter is supposed to trigger a side effectful action that allocates resources, which are then used via use and released via close.

Note that this is often used in combination with Suspend and data types like cats.effect.concurrent.Ref in order to communicate the acquired resources between open, use and close.

acquire: is an effect that should allocate necessary resources to be used in use and released in close
use: is the stream created via this scope
release: is an effect that should deallocate acquired resources via open and that will be executed no matter what

Source: Iterant.scala

Linear Supertypes

Iterant[F, B], Serializable, Product, Equals, AnyRef, Any

Ordering

Alphabetic
By Inheritance

Inherited

Scope
Iterant
Serializable
Product
Equals
AnyRef
Any

Hide All
Show All

Visibility

Public
All

Instance Constructors

new Scope(acquire: F[A], use: (A) => F[Iterant[F, B]], release: (A, ExitCase[Throwable]) => F[Unit])
acquire
is an effect that should allocate necessary resources to be used in use and released in close
use
is the stream created via this scope
release
is an effect that should deallocate acquired resources via open and that will be executed no matter what

Value Members

final def !=(arg0: Any): Boolean
Definition Classes
AnyRef → Any
final def ##(): Int
Definition Classes
AnyRef → Any
final def ++[B >: B](rhs: => Iterant[F, B])(implicit F: Sync[F]): Iterant[F, B]
Appends the given stream to the end of the source, effectively concatenating them.
Appends the given stream to the end of the source, effectively concatenating them.
Example:
```
import monix.eval.Task

// Yields 1, 2, 3, 4
Iterant[Task].of(1, 2) ++ Iterant[Task].of(3, 4)
```
rhs
is the (right hand side) lazily evaluated iterant to concatenate at the end of this iterant.
Definition Classes
Iterant
final def ++[B >: B](rhs: F[Iterant[F, B]])(implicit F: Sync[F]): Iterant[F, B]
Appends a stream to the end of the source, effectively concatenating them.
Appends a stream to the end of the source, effectively concatenating them.
The right hand side is suspended in the F[_] data type, thus allowing for laziness.
Example:
```
import monix.eval.Task

// Yields 1, 2, 3, 4
Iterant[Task].of(1, 2) ++ Task.eval {
  Iterant[Task].of(3, 4)
}
```
rhs
is the iterant to append at the end of our source.
Definition Classes
Iterant
final def +:[B >: B](head: B)(implicit F: Applicative[F]): Iterant[F, B]
Prepends an element to the iterant, returning a new iterant that will start with the given head and then continue with the source.
Prepends an element to the iterant, returning a new iterant that will start with the given head and then continue with the source.
Example:
```
import monix.eval.Task

// Yields 1, 2, 3, 4
1 +: Iterant[Task].of(2, 3, 4)
```
head
is the element to prepend at the start of this iterant
Definition Classes
Iterant
final def :+[B >: B](elem: B)(implicit F: Sync[F]): Iterant[F, B]
Appends the right hand side element to the end of this iterant.
Appends the right hand side element to the end of this iterant.
Example:
```
import monix.eval.Task

// Yields 1, 2, 3, 4
Iterant[Task].of(1, 2, 3) :+ 4
```
elem
is the element to append at the end
Definition Classes
Iterant
final def ==(arg0: Any): Boolean
Definition Classes
AnyRef → Any
def accept[R](visitor: Visitor[F, B, R]): R
Definition Classes
Scope → Iterant
See also
Iterant.Visitor.
val acquire: F[A]
final def asInstanceOf[T0]: T0
Definition Classes
Any
final def attempt(implicit F: Sync[F]): Iterant[F, Either[Throwable, B]]
Converts the source Iterant that emits A elements into an iterant that emits Either[Throwable, A], thus materializing whatever error that might interrupt the stream.
Converts the source Iterant that emits A elements into an iterant that emits Either[Throwable, A], thus materializing whatever error that might interrupt the stream.
Example:
```
import monix.eval.Task
import monix.execution.exceptions.DummyException

// Yields Right(1), Right(2), Right(3)
Iterant[Task].of(1, 2, 3).attempt

// Yields Right(1), Right(2), Left(DummyException())
(Iterant[Task].of(1, 2) ++
  Iterant[Task].raiseError[Int](DummyException("dummy"))).attempt
```
Definition Classes
Iterant
def batched(count: Int)(implicit F: Sync[F]): Iterant[F, B]
Optimizes the access to the source by periodically gathering items emitted into batches of the specified size and emitting NextBatch nodes.
Optimizes the access to the source by periodically gathering items emitted into batches of the specified size and emitting NextBatch nodes.
For this operation we have this law:
source.batched(16) <-> source
This means that the result will emit exactly what the source emits, however the underlying representation will be different, the emitted notes being of type NextBatch, wrapping arrays with the length equal to the given count.
Very similar in behavior with bufferTumbling, however the batches are implicit, not explicit. Useful for optimization.
Definition Classes
Iterant
final def bufferSliding(count: Int, skip: Int)(implicit F: Sync[F]): Iterant[F, Seq[B]]
Returns an iterant that emits buffers of items it collects from the source iterant.
Returns an iterant that emits buffers of items it collects from the source iterant. The resulting iterant emits buffers every skip items, each containing count items.
If the source iterant completes, then the current buffer gets signaled downstream. If the source triggers an error then the current buffer is being dropped and the error gets propagated immediately.
For count and skip there are 3 possibilities:
1. in case skip == count, then there are no items dropped and no overlap, the call being equivalent to buffer(count)
2. in case skip < count, then overlap between buffers happens, with the number of elements being repeated being count - skip
3. in case skip > count, then skip - count elements start getting dropped between windows
Example:
```
import monix.eval.Coeval

val source = Iterant[Coeval].of(1, 2, 3, 4, 5, 6, 7)

// Yields Seq(1, 2, 3), Seq(4, 5, 6), Seq(7)
source.bufferSliding(3, 3)

// Yields Seq(1, 2, 3), Seq(5, 6, 7)
source.bufferSliding(3, 4)

// Yields Seq(1, 2, 3), Seq(3, 4, 5), Seq(5, 6, 7)
source.bufferSliding(3, 2)
```
count
the maximum size of each buffer before it should be emitted
skip
how many items emitted by the source iterant should be skipped before starting a new buffer. Note that when skip and count are equal, this is the same operation as bufferTumbling(count)
Definition Classes
Iterant
def bufferTumbling(count: Int)(implicit F: Sync[F]): Iterant[F, Seq[B]]
Periodically gather items emitted by an iterant into bundles and emit these bundles rather than emitting the items one at a time.
Periodically gather items emitted by an iterant into bundles and emit these bundles rather than emitting the items one at a time. This version of buffer is emitting items once the internal buffer has reached the given count.
If the source iterant completes, then the current buffer gets signaled downstream. If the source triggers an error then the current buffer is being dropped and the error gets propagated immediately.
```
import monix.eval.Coeval

// Yields Seq(1, 2, 3), Seq(4, 5, 6), Seq(7)
Iterant[Coeval].of(1, 2, 3, 4, 5, 6, 7).bufferTumbling(3)
```
count
the maximum size of each buffer before it should be emitted
Definition Classes
Iterant
See also
bufferSliding for the more flexible version that allows to specify a skip argument.
def clone(): AnyRef
Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.CloneNotSupportedException]) @native()
final def collect[B](pf: PartialFunction[B, B])(implicit F: Sync[F]): Iterant[F, B]
Builds a new iterant by applying a partial function to all elements of the source on which the function is defined.
Builds a new iterant by applying a partial function to all elements of the source on which the function is defined.
Example:
```
import monix.eval.Task

// Yields 2, 4, 6
Iterant[Task].of(1, 2, 3, 4, 5, 6)
  .map { x => Option(x).filter(_ % 2 == 0) }
  .collect { case Some(x) => x }
```
B
the element type of the returned iterant.
pf
the partial function that filters and maps the iterant
returns
a new iterant resulting from applying the partial function pf to each element on which it is defined and collecting the results. The order of the elements is preserved.
Definition Classes
Iterant
final def completedL(implicit F: Sync[F]): F[Unit]
Upon evaluation of the result, consumes this iterant to completion.
Upon evaluation of the result, consumes this iterant to completion.
Example:
```
import cats.implicits._
import monix.eval.Task

// Whatever...
val iterant = Iterant[Task].range(0, 10000)

val onFinish: Task[Unit] =
  iterant.completedL >> Task.eval(println("Done!"))
```
Definition Classes
Iterant
final def concat[B](implicit ev: <:<[B, Iterant[F, B]], F: Sync[F]): Iterant[F, B]
Alias for concat.
Alias for concat.
Definition Classes
Iterant
final def concatMap[B](f: (B) => Iterant[F, B])(implicit F: Sync[F]): Iterant[F, B]
Alias for flatMap.
Alias for flatMap.
Definition Classes
Iterant
final def consume(implicit F: Concurrent[F], cs: ContextShift[F]): Resource[F, Consumer[F, B]]
Create a ConsumerF value that can be used to consume events from the channel.
Create a ConsumerF value that can be used to consume events from the channel.
The returned value is a Resource, because a consumer can be unsubscribed from the channel early, with its internal buffer being garbage collected and the finalizers of the source being triggered.
```
import monix.eval.Task
import monix.tail.Iterant.Consumer

def sum(channel: Consumer[Task, Int], acc: Long = 0): Task[Long] =
  channel.pull.flatMap {
    case Right(a) =>
      sum(channel, acc + a)
    case Left(None) =>
      Task.pure(acc)
    case Left(Some(e)) =>
      Task.raiseError(e)
  }

Iterant[Task].range(0, 10000).consume.use { consumer =>
  sum(consumer)
}
```
Definition Classes
Iterant
See also
consumeWithConfig for fine tuning the internal buffer of the created consumer
final def consumeWithConfig(config: Config)(implicit F: Concurrent[F], cs: ContextShift[F]): Resource[F, Consumer[F, B]]
Version of consume that allows for fine tuning the underlying buffer used.
Version of consume that allows for fine tuning the underlying buffer used.
There are two parameters that can be configured:
- the BufferCapacity, which can be Unbounded, for an unlimited internal buffer in case the consumer is definitely faster than the producer, or Bounded in case back-pressuring a slow consumer is desirable
- the ChannelType.ConsumerSide, which specifies if this consumer will use multiple workers in parallel or not; this is an optimization, with the safe choice being MultiConsumer, which specifies that multiple workers can use the created consumer in parallel, pulling data from multiple threads at the same time; whereas SingleConsumer specifies that the data will be read sequentially by a single worker, not in parallel; this being a risky optimization
config
is the configuration object for fine tuning the behavior of the created consumer, see ConsumerF.Config1
Definition Classes
Iterant
Annotations
@UnsafeProtocol()
final def countL(implicit F: Sync[F]): F[Long]
Counts the total number of elements emitted by the source.
Counts the total number of elements emitted by the source.
Example:
```
import cats.effect.IO

// Yields 100
Iterant[IO].range(0, 100).countL

// Yields 1
Iterant[IO].pure(1).countL

// Yields 0
Iterant[IO].empty[Int].countL
```
Definition Classes
Iterant
final def distinctUntilChanged(implicit F: Sync[F], A: Eq[B]): Iterant[F, B]
Suppress duplicate consecutive items emitted by the source.
Suppress duplicate consecutive items emitted by the source.
Example:
```
import cats.implicits._
import monix.eval.Coeval

// Yields 1, 2, 1, 3, 2, 4
Iterant[Coeval].of(1, 1, 1, 2, 2, 1, 1, 3, 3, 3, 2, 2, 4, 4, 4)
  .distinctUntilChanged
```
Duplication is detected by using the equality relationship provided by the cats.Eq type class. This allows one to override the equality operation being used (e.g. maybe the default .equals is badly defined, or maybe you want reference equality, so depending on use case).
Cats Eq and Scala Interop
Monix prefers to work with cats.Eq for assessing the equality of elements that have an ordering defined, instead of scala.math.Equiv.
We do this because Scala's Equiv has a default instance defined that's based on universal equality and that's a big problem, because when using the Eq type class, it is universal equality that we want to avoid and there have been countless of bugs in the ecosystem related to both universal equality and Equiv. Thankfully people are working to fix it.
We also do this for consistency, as Monix is now building on top of Cats. This may change in the future, depending on what happens with typelevel/cats#2455.
Defining Eq instance is easy and we can use universal equality in our definitions as well:
```
import cats.Eq

case class Address(host: String, port: Int)

implicit val eqForAddress: Eq[Address] =
  Eq.fromUniversalEquals
```
A
is the cats.Eq instance that defines equality for A
Definition Classes
Iterant
final def distinctUntilChangedByKey[K](key: (B) => K)(implicit F: Sync[F], K: Eq[K]): Iterant[F, B]
Given a function that returns a key for each element emitted by the source, suppress consecutive duplicate items.
Given a function that returns a key for each element emitted by the source, suppress consecutive duplicate items.
Example:
```
import cats.implicits._
import monix.eval.Coeval

// Yields 1, 2, 3, 4
Iterant[Coeval].of(1, 3, 2, 4, 2, 3, 5, 7, 4)
  .distinctUntilChangedByKey(_ % 2)
```
Duplication is detected by using the equality relationship provided by the cats.Eq type class. This allows one to override the equality operation being used (e.g. maybe the default .equals is badly defined, or maybe you want reference equality, so depending on use case).
Cats Eq and Scala Interop
Monix prefers to work with cats.Eq for assessing the equality of elements that have an ordering defined, instead of scala.math.Equiv.
We do this because Scala's Equiv has a default instance defined that's based on universal equality and that's a big problem, because when using the Eq type class, it is universal equality that we want to avoid and there have been countless of bugs in the ecosystem related to both universal equality and Equiv. Thankfully people are working to fix it.
We also do this for consistency, as Monix is now building on top of Cats. This may change in the future, depending on what happens with typelevel/cats#2455.
Defining Eq instance is easy and we can use universal equality in our definitions as well:
```
import cats.Eq

case class Address(host: String, port: Int)

implicit val eqForAddress: Eq[Address] =
  Eq.fromUniversalEquals
```
key
is a function that returns a K key for each element, a value that's then used to do the deduplication
K
is the cats.Eq instance that defines equality for the key type K
Definition Classes
Iterant
final def drop(n: Int)(implicit F: Sync[F]): Iterant[F, B]
Drops the first n elements (from the start).
Drops the first n elements (from the start).
Example:
```
import monix.eval.Task

// Yields 4, 5
Iterant[Task].of(1, 2, 3, 4, 5).drop(3)
```
n
the number of elements to drop
returns
a new iterant that drops the first n elements emitted by the source
Definition Classes
Iterant
final def dropLast(n: Int)(implicit F: Sync[F]): Iterant[F, B]
Drops the last n elements (from the end).
Drops the last n elements (from the end).
Example:
```
import monix.eval.Task

// Yields 1, 2
Iterant[Task].of(1, 2, 3, 4, 5).dropLast(3)
```
n
the number of elements to drop
returns
a new iterant that drops the last n elements emitted by the source
Definition Classes
Iterant
final def dropWhile(p: (B) => Boolean)(implicit F: Sync[F]): Iterant[F, B]
Drops the longest prefix of elements that satisfy the given predicate and returns a new iterant that emits the rest.
Drops the longest prefix of elements that satisfy the given predicate and returns a new iterant that emits the rest.
Example:
```
import monix.eval.Task

// Yields 4, 5
Iterant[Task].of(1, 2, 3, 4, 5).dropWhile(_ < 4)
```
p
is the predicate used to test whether the current element should be dropped, if true, or to interrupt the dropping process, if false
returns
a new iterant that drops the elements of the source until the first time the given predicate returns false
Definition Classes
Iterant
final def dropWhileWithIndex(p: (B, Int) => Boolean)(implicit F: Sync[F]): Iterant[F, B]
Drops the longest prefix of elements that satisfy the given function and returns a new Iterant that emits the rest.
Drops the longest prefix of elements that satisfy the given function and returns a new Iterant that emits the rest.
In comparison with dropWhile, this version accepts a function that takes an additional parameter: the zero-based index of the element.
Example:
```
import monix.eval.Task

// Yields 3, 4, 5
Iterant[Task].of(1, 2, 3, 4, 5)
  .dropWhileWithIndex((value, index) => value >= index * 2)
```
p
is the predicate used to test whether the current element should be dropped, if true, or to interrupt the dropping process, if false
returns
a new iterant that drops the elements of the source until the first time the given predicate returns false
Definition Classes
Iterant
final def dump(prefix: String, out: PrintStream = System.out)(implicit F: Sync[F]): Iterant[F, B]
Dumps incoming events to standard output with provided prefix.
Dumps incoming events to standard output with provided prefix.
Utility that can be used for debugging purposes.
Example:
```
import monix.eval.Task
import monix.execution.Scheduler.Implicits.global

Iterant[Task].range(0, 4)
  .dump("O")
  .completedL

// 0: O --> next-batch --> 0
// 1: O --> next-batch --> 1
// 2: O --> next-batch --> 2
// 3: O --> next-batch --> 3
// 4: O --> halt --> no error
```
Definition Classes
Iterant
final def eq(arg0: AnyRef): Boolean
Definition Classes
AnyRef
final def existsL(p: (B) => Boolean)(implicit F: Sync[F]): F[Boolean]
Returns true in case the given predicate is satisfied by any of the emitted items, or false in case the end of the stream has been reached with no items satisfying the given predicate.
Returns true in case the given predicate is satisfied by any of the emitted items, or false in case the end of the stream has been reached with no items satisfying the given predicate.
Example:
```
import monix.eval.Coeval

val source = Iterant[Coeval].of(1, 2, 3, 4)

// Yields true
source.existsL(_ % 2 == 0)

// Yields false
source.existsL(_ % 7 == 0)
```
p
is a predicate function that's going to test each item emitted by the source until we get a positive match for one of them or until the stream ends
returns
true if any of the items satisfies the given predicate or false if none of them do
Definition Classes
Iterant
final def filter(p: (B) => Boolean)(implicit F: Sync[F]): Iterant[F, B]
Filters the iterant by the given predicate function, returning only those elements that match.
Filters the iterant by the given predicate function, returning only those elements that match.
Example:
```
import monix.eval.Task

// Yields 2, 4, 6
Iterant[Task].of(1, 2, 3, 4, 5, 6).filter(_ % 2 == 0)
```
p
the predicate used to test elements.
returns
a new iterant consisting of all elements that satisfy the given predicate. The order of the elements is preserved.
Definition Classes
Iterant
def finalize(): Unit
Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.Throwable])
def findL(p: (B) => Boolean)(implicit F: Sync[F]): F[Option[B]]
Given a predicate, finds the first item that satisfies it, returning Some(a) if available, or None otherwise.
Given a predicate, finds the first item that satisfies it, returning Some(a) if available, or None otherwise.
```
import monix.eval.Coeval

// Yields Some(2)
Iterant[Coeval].of(1, 2, 3, 4).findL(_ % 2 == 0)

// Yields None
Iterant[Coeval].of(1, 2, 3, 4).findL(_ > 10)
```
The stream is traversed from beginning to end, the process being interrupted as soon as it finds one element matching the predicate, or until the stream ends.
p
is the function to test the elements of the source
returns
either Some(value) in case value is an element emitted by the source, found to satisfy the predicate, or None otherwise
Definition Classes
Iterant
final def flatMap[B](f: (B) => Iterant[F, B])(implicit F: Sync[F]): Iterant[F, B]
Applies the function to the elements of the source and concatenates the results.
Applies the function to the elements of the source and concatenates the results.
This operation is the monadic "bind", with all laws it entails.
Also note that the implementation can use constant memory depending on usage, thus it can be used in tail recursive loops.
Example:
```
import monix.eval.Task

// Effectively equivalent with .filter
Iterant[Task].of(1, 2, 3, 4, 5, 6).flatMap { elem =>
  if (elem % 2 == 0)
    Iterant[Task].pure(elem)
  else
    Iterant[Task].empty[Int]
}
```
f
is the function mapping elements from the source to iterants
Definition Classes
Iterant
final def flatten[B](implicit ev: <:<[B, Iterant[F, B]], F: Sync[F]): Iterant[F, B]
Given an Iterant that generates Iterant elements, concatenates all the generated iterants.
Given an Iterant that generates Iterant elements, concatenates all the generated iterants.
Equivalent with: source.flatMap(x => x)
Definition Classes
Iterant
final def foldL(implicit F: Sync[F], A: Monoid[B]): F[B]
Given evidence that type A has a cats.Monoid implementation, folds the stream with the provided monoid definition.
Given evidence that type A has a cats.Monoid implementation, folds the stream with the provided monoid definition.
For streams emitting numbers, this effectively sums them up. For strings, this concatenates them.
Example:
```
import cats.implicits._
import monix.eval.Task

// Yields 10
Iterant[Task].of(1, 2, 3, 4).foldL

// Yields "1234"
Iterant[Task].of("1", "2", "3", "4").foldL
```
Note, in case you don't have a Monoid instance in scope, but you feel like you should, try one of these imports:
```
// everything
import cats.implicits._
// a la carte:
import cats.instances.all._
```
A
is the cats.Monoid type class instance that's needed in scope for folding the source
returns
the result of combining all elements of the source, or the defined Monoid.empty element in case the stream is empty
Definition Classes
Iterant
final def foldLeftL[S](seed: => S)(op: (S, B) => S)(implicit F: Sync[F]): F[S]
Left associative fold using the function op.
Left associative fold using the function op.
On execution the stream will be traversed from left to right, and the given function will be called with the prior result, accumulating state until the end, when the summary is returned.
Example:
```
import monix.eval.Task

// Yields 15 (1 + 2 + 3 + 4 + 5)
Iterant[Task].of(1, 2, 3, 4, 5).foldLeftL(0)(_ + _)
```
seed
is the start value
op
is the binary operator
returns
the result of inserting op between consecutive elements of this iterant, going from left to right with the seed as the start value, or seed if the iterant is empty.
Definition Classes
Iterant
final def foldRightL[B](b: F[B])(f: (B, F[B]) => F[B])(implicit F: Sync[F]): F[B]
Lazily fold the stream to a single value from the right.
Lazily fold the stream to a single value from the right.
This is the common foldr operation from Haskell's Foldable, or foldRight from cats.Foldable, but with the difference that Iterant is a lazy data type and thus it has to operate in the F[_] context.
Here's for example how existsL, forallL and ++ could be expressed in terms of foldRightL:
```
import cats.implicits._
import cats.effect.Sync

def exists[F[_], A](fa: Iterant[F, A], p: A => Boolean)
  (implicit F: Sync[F]): F[Boolean] = {

  fa.foldRightL(F.pure(false)) { (a, next) =>
    if (p(a)) F.pure(true) else next
  }
}

def forall[F[_], A](fa: Iterant[F, A], p: A => Boolean)
  (implicit F: Sync[F]): F[Boolean] = {

  fa.foldRightL(F.pure(true)) { (a, next) =>
    if (!p(a)) F.pure(false) else next
  }
}

def concat[F[_], A](lh: Iterant[F, A], rh: Iterant[F, A])
  (implicit F: Sync[F]): Iterant[F, A] = {

  Iterant.suspend[F, A] {
    lh.foldRightL(F.pure(rh)) { (a, rest) =>
      F.pure(Iterant.nextS(a, rest))
    }
  }
}
```
In this example we are short-circuiting the processing in case we find the one element that we are looking for, otherwise we keep traversing the stream until the end, finally returning the default value in case we haven't found what we were looking for.
b
is the starting value; in case f is a binary operator, this is typically its left-identity (zero)
f
is the function to be called that folds the list, receiving the current element being iterated on (first param) and the (lazy) result from recursively combining the rest of the list (second param)
Definition Classes
Iterant
See also
foldWhileLeftL and foldWhileLeftEvalL
final def foldWhileLeftEvalL[S](seed: F[S])(op: (S, B) => F[Either[S, S]])(implicit F: Sync[F]): F[S]
Left associative fold using the function op that can be short-circuited.
Left associative fold using the function op that can be short-circuited.
On execution the stream will be traversed from left to right, and the given function will be called with the prior result, accumulating state either until the end, or until op returns a Right result, when the summary is returned.
The results are returned in the F[_] functor context, meaning that we can have lazy or asynchronous processing and we can suspend side effects, depending on the F data type being used.
Example using cats.effect.IO:
```
import cats.implicits._
import cats.effect.IO

// Sums first 10 items
Iterant[IO].range(0, 1000).foldWhileLeftEvalL(IO((0, 0))) {
  case ((sum, count), e) =>
    IO {
      val next = (sum + e, count + 1)
      if (count + 1 < 10) Left(next) else Right(next)
    }
}

// Implements exists(predicate)
Iterant[IO].of(1, 2, 3, 4, 5).foldWhileLeftEvalL(IO(false)) {
  (default, e) =>
    IO { if (e == 3) Right(true) else Left(default) }
}

// Implements forall(predicate)
Iterant[IO].of(1, 2, 3, 4, 5).foldWhileLeftEvalL(IO(true)) {
  (default, e) =>
    IO { if (e != 3) Right(false) else Left(default) }
}
```
seed
is the start value
op
is the binary operator returning either Left, signaling that the state should be evolved or a Right, signaling that the process can be short-circuited and the result returned immediately
returns
the result of inserting op between consecutive elements of this iterant, going from left to right with the seed as the start value, or seed if the iterant is empty
Definition Classes
Iterant
See also
Iterant.foldWhileLeftL for the strict version.
final def foldWhileLeftL[S](seed: => S)(op: (S, B) => Either[S, S])(implicit F: Sync[F]): F[S]
Left associative fold using the function op that can be short-circuited.
Left associative fold using the function op that can be short-circuited.
On execution the stream will be traversed from left to right, and the given function will be called with the prior result, accumulating state either until the end, or until op returns a Right result, when the summary is returned.
Example:
```
import monix.eval.Task

// Sums first 10 items
Iterant[Task].range(0, 1000).foldWhileLeftL((0, 0)) {
  case ((sum, count), e) =>
    val next = (sum + e, count + 1)
    if (count + 1 < 10) Left(next) else Right(next)
}

// Implements exists(predicate)
Iterant[Task].of(1, 2, 3, 4, 5).foldWhileLeftL(false) {
  (default, e) =>
    if (e == 3) Right(true) else Left(default)
}

// Implements forall(predicate)
Iterant[Task].of(1, 2, 3, 4, 5).foldWhileLeftL(true) {
  (default, e) =>
    if (e != 3) Right(false) else Left(default)
}
```
seed
is the start value
op
is the binary operator returning either Left, signaling that the state should be evolved or a Right, signaling that the process can be short-circuited and the result returned immediately
returns
the result of inserting op between consecutive elements of this iterant, going from left to right with the seed as the start value, or seed if the iterant is empty
Definition Classes
Iterant
See also
Iterant.foldWhileLeftL for the lazy, potentially asynchronous version.
final def forallL(p: (B) => Boolean)(implicit F: Sync[F]): F[Boolean]
Returns true in case the given predicate is satisfied by all of the emitted items, or false in case the given predicate fails for any of those items.
Returns true in case the given predicate is satisfied by all of the emitted items, or false in case the given predicate fails for any of those items.
Example:
```
import monix.eval.Coeval

val source = Iterant[Coeval].of(1, 2, 3, 4)

// Yields false
source.forallL(_ % 2 == 0)

// Yields true
source.existsL(_ < 10)
```
p
is a predicate function that's going to test each item emitted by the source until we get a negative match for one of them or until the stream ends
returns
true if all of the items satisfy the given predicate or false if any of them don't
Definition Classes
Iterant
final def foreach(cb: (B) => Unit)(implicit F: Sync[F]): F[Unit]
Consumes the source iterable, executing the given callback for each element.
Consumes the source iterable, executing the given callback for each element.
Example:
```
import monix.eval.Task

// Prints all elements, each one on a different line
Iterant[Task].of(1, 2, 3).foreach { elem =>
  println("Elem: " + elem.toString)
}
```
cb
is the callback to call for each element emitted by the source.
Definition Classes
Iterant
final def getClass(): Class[_ <: AnyRef]
Definition Classes
AnyRef → Any
Annotations
@native()
final def guarantee(f: F[Unit])(implicit F: Sync[F]): Iterant[F, B]
Given a routine make sure to execute it whenever the current stream reaches the end, successfully, in error, or canceled.
Given a routine make sure to execute it whenever the current stream reaches the end, successfully, in error, or canceled.
Implements cats.effect.Bracket.guarantee.
Example:
```
import monix.eval.Task

def iterant: Iterant[Task, Int] =
  Iterant.delay(???)

iterant.guarantee(Task.eval {
  println("Releasing resources!")
})
```
f
is the function to execute on early stop
Definition Classes
Iterant
final def guaranteeCase(f: (ExitCase[Throwable]) => F[Unit])(implicit F: Applicative[F]): Iterant[F, B]
Returns a new iterant in which f is scheduled to be executed on halt or if canceled.
Returns a new iterant in which f is scheduled to be executed on halt or if canceled.
Implements cats.effect.Bracket.guaranteeCase.
This would typically be used to ensure that a finalizer will run at the end of the stream.
Example:
```
import monix.eval.Task
import cats.effect.ExitCase

def iterant: Iterant[Task, Int] =
  Iterant.delay(???)

iterant.guaranteeCase(err => Task.eval {
  err match {
    case ExitCase.Completed =>
      println("Completed successfully!")
    case ExitCase.Error(e) =>
      e.printStackTrace()
    case ExitCase.Canceled =>
      println("Was stopped early!")
  }
})
```
f
is the finalizer to execute when streaming is terminated, by successful completion, error or cancellation
Definition Classes
Iterant
final def headOptionL(implicit F: Sync[F]): F[Option[B]]
Optionally selects the first element.
Optionally selects the first element.
```
import monix.eval.Task

// Yields Some(1)
Iterant[Task].of(1, 2, 3, 4).headOptionL

// Yields None
Iterant[Task].empty[Int].headOptionL
```
returns
the first element of this iterant if it is nonempty, or None if it is empty, in the F context.
Definition Classes
Iterant
final def interleave[B >: B](rhs: Iterant[F, B])(implicit F: Sync[F]): Iterant[F, B]
Lazily interleaves two iterants together, starting with the first element from self.
Lazily interleaves two iterants together, starting with the first element from self.
The length of the result will be the shorter of the two arguments.
Example:
```
import monix.eval.Task

val lh = Iterant[Task].of(11, 12)
val rh = Iterant[Task].of(21, 22, 23)

// Yields 11, 21, 12, 22
lh.interleave(rh)
```
rhs
is the other iterant to interleave the source with (the right hand side)
Definition Classes
Iterant
final def intersperse(start: B, separator: B, end: B)(implicit F: Sync[F]): Iterant[F, B]
Creates a new stream from the source that will emit the start element followed by the upstream elements paired with the separator and lastly the end element.
Creates a new stream from the source that will emit the start element followed by the upstream elements paired with the separator and lastly the end element.
```
import monix.eval.Coeval

// Yields '<', 'a', '-', 'b', '>'
Iterant[Coeval].of('a', 'b').intersperse('<', '-', '>')
```
start
the first element emitted
separator
the separator
end
the last element emitted
Definition Classes
Iterant
final def intersperse(separator: B)(implicit F: Sync[F]): Iterant[F, B]
Creates a new stream from the source that will emit a specific separator between every pair of elements.
Creates a new stream from the source that will emit a specific separator between every pair of elements.
```
import monix.eval.Coeval

// Yields 1, 0, 2, 0, 3
Iterant[Coeval].of(1, 2, 3).intersperse(0)
```
separator
the separator
Definition Classes
Iterant
final def isInstanceOf[T0]: Boolean
Definition Classes
Any
final def lastOptionL(implicit F: Sync[F]): F[Option[B]]
Optionally selects the last element.
Optionally selects the last element.
```
import monix.eval.Task

// Yields Some(4)
Iterant[Task].of(1, 2, 3, 4).lastOptionL

// Yields None
Iterant[Task].empty[Int].lastOptionL
```
returns
the last element of this iterant if it is nonempty, or None if it is empty, in the F context.
Definition Classes
Iterant
final def map[B](f: (B) => B)(implicit F: Sync[F]): Iterant[F, B]
Returns a new stream by mapping the supplied function over the elements of the source.
Returns a new stream by mapping the supplied function over the elements of the source.
```
import monix.eval.Task

// Yields 2, 4, 6
Iterant[Task].of(1, 2, 3).map(_ * 2)
```
f
is the mapping function that transforms the source
returns
a new iterant that's the result of mapping the given function over the source
Definition Classes
Iterant
final def mapBatch[B](f: (B) => Batch[B])(implicit F: Sync[F]): Iterant[F, B]
Returns a new stream by mapping the supplied function over the elements of the source yielding Iterant consisting of NextBatch nodes.
Returns a new stream by mapping the supplied function over the elements of the source yielding Iterant consisting of NextBatch nodes.
```
import monix.eval.Task
import monix.tail.batches.Batch

// Yields 1, 2, 3, 4, 5
Iterant[Task].of(List(1, 2, 3), List(4), List(5)).mapBatch(Batch.fromSeq(_))
// Yields 2, 4, 6
Iterant[Task].of(1, 2, 3).mapBatch(x => Batch(x * 2))
```
f
is the mapping function that transforms the source into batches.
returns
a new iterant that's the result of mapping the given function over the source
Definition Classes
Iterant
final def mapEval[B](f: (B) => F[B])(implicit F: Sync[F]): Iterant[F, B]
Given a mapping function that returns a possibly lazy or asynchronous result, applies it over the elements emitted by the stream.
Given a mapping function that returns a possibly lazy or asynchronous result, applies it over the elements emitted by the stream.
```
import monix.eval.Task

Iterant[Task].of(1, 2, 3, 4).mapEval { elem =>
  Task.eval {
    println("Received: " + elem.toString)
    elem * 2
  }
}
```
f
is the mapping function that transforms the source
returns
a new iterant that's the result of mapping the given function over the source,
Definition Classes
Iterant
final def mapK[G[_]](f: ~>[F, G])(implicit G: Sync[G]): Iterant[G, B]
Given a functor transformation from F to G, lifts the source into an iterant that is going to use the resulting G for evaluation.
Given a functor transformation from F to G, lifts the source into an iterant that is going to use the resulting G for evaluation.
This can be used for replacing the underlying F type into something else. For example say we have an iterant that uses monix.eval.Coeval, but we want to convert it into one that uses monix.eval.Task for evaluation:
```
import cats.~>
import monix.eval._

// Source is using Coeval for evaluation
val source = Iterant[Coeval].of(1, 2, 3, 4)

// Transformation to an Iterant of Task
source.mapK(Coeval.liftTo[Task])
```
This operator can be used for more than transforming the F type into something else.
G
is the data type that is going to drive the evaluation of the resulting iterant
f
is the functor transformation that's used to transform the source into an iterant that uses G for evaluation
Definition Classes
Iterant
final def maxByL[K](key: (B) => K)(implicit F: Sync[F], K: Order[K]): F[Option[B]]
Takes the elements of the source iterant and emits the element that has the maximum key value, where the key is generated by the given function.
Takes the elements of the source iterant and emits the element that has the maximum key value, where the key is generated by the given function.
Example:
```
import cats.implicits._
import monix.eval.Coeval

case class Person(name: String, age: Int)

// Yields Some(Person("Peter", 23))
Iterant[Coeval].of(Person("Peter", 23), Person("May", 21))
  .maxByL(_.age)

// Yields None
Iterant[Coeval].empty[Person].maxByL(_.age)
```
Cats Order and Scala Interop
Monix prefers to work with cats.Order for assessing the order of elements that have an ordering defined, instead of scala.math.Ordering.
We do this for consistency, as Monix is now building on top of Cats. This may change in the future, depending on what happens with typelevel/cats#2455.
Building a cats.Order is easy to do if you already have a Scala Ordering instance:
```
import cats.Order

case class Person(name: String, age: Int)

// Starting from a Scala Ordering
implicit val scalaOrderingForPerson: Ordering[Person] =
  new Ordering[Person] {
    def compare(x: Person, y: Person): Int =
      x.age.compareTo(y.age) match {
        case 0 => x.name.compareTo(y.name)
        case o => o
      }
  }

// Building a cats.Order from it
implicit val catsOrderForPerson: Order[Person] =
  Order.fromOrdering
```
You can also do that in reverse, so you can prefer cats.Order (due to Cats also exposing laws and tests for free) and build a Scala Ordering when needed:
```
val scalaOrdering = catsOrderForPerson.toOrdering
```
key
is the function that returns the key for which the given ordering is defined
K
is the cats.Order type class instance that's going to be used for comparing elements
returns
the maximum element of the source stream, relative to its key generated by the given function and the given ordering
Definition Classes
Iterant
final def maxL(implicit F: Sync[F], A: Order[B]): F[Option[B]]
Given a cats.Order over the stream's elements, returns the maximum element in the stream.
Given a cats.Order over the stream's elements, returns the maximum element in the stream.
Example:
```
import cats.implicits._
import monix.eval.Coeval

// Yields Some(20)
Iterant[Coeval].of(1, 10, 7, 6, 8, 20, 3, 5).maxL

// Yields None
Iterant[Coeval].empty[Int].maxL
```
Cats Order and Scala Interop
Monix prefers to work with cats.Order for assessing the order of elements that have an ordering defined, instead of scala.math.Ordering.
We do this for consistency, as Monix is now building on top of Cats. This may change in the future, depending on what happens with typelevel/cats#2455.
Building a cats.Order is easy to do if you already have a Scala Ordering instance:
```
import cats.Order

case class Person(name: String, age: Int)

// Starting from a Scala Ordering
implicit val scalaOrderingForPerson: Ordering[Person] =
  new Ordering[Person] {
    def compare(x: Person, y: Person): Int =
      x.age.compareTo(y.age) match {
        case 0 => x.name.compareTo(y.name)
        case o => o
      }
  }

// Building a cats.Order from it
implicit val catsOrderForPerson: Order[Person] =
  Order.fromOrdering
```
You can also do that in reverse, so you can prefer cats.Order (due to Cats also exposing laws and tests for free) and build a Scala Ordering when needed:
```
val scalaOrdering = catsOrderForPerson.toOrdering
```
A
is the cats.Order type class instance that's going to be used for comparing elements
returns
the maximum element of the source stream, relative to the defined Order
Definition Classes
Iterant
final def minByL[K](key: (B) => K)(implicit F: Sync[F], K: Order[K]): F[Option[B]]
Takes the elements of the source iterant and emits the element that has the minimum key value, where the key is generated by the given function.
Takes the elements of the source iterant and emits the element that has the minimum key value, where the key is generated by the given function.
Example:
```
import cats.implicits._
import monix.eval.Coeval

case class Person(name: String, age: Int)

// Yields Some(Person("May", 21))
Iterant[Coeval].of(Person("Peter", 23), Person("May", 21))
  .minByL(_.age)

// Yields None
Iterant[Coeval].empty[Person].minByL(_.age)
```
Cats Order and Scala Interop
Monix prefers to work with cats.Order for assessing the order of elements that have an ordering defined, instead of scala.math.Ordering.
We do this for consistency, as Monix is now building on top of Cats. This may change in the future, depending on what happens with typelevel/cats#2455.
Building a cats.Order is easy to do if you already have a Scala Ordering instance:
```
import cats.Order

case class Person(name: String, age: Int)

// Starting from a Scala Ordering
implicit val scalaOrderingForPerson: Ordering[Person] =
  new Ordering[Person] {
    def compare(x: Person, y: Person): Int =
      x.age.compareTo(y.age) match {
        case 0 => x.name.compareTo(y.name)
        case o => o
      }
  }

// Building a cats.Order from it
implicit val catsOrderForPerson: Order[Person] =
  Order.fromOrdering
```
You can also do that in reverse, so you can prefer cats.Order (due to Cats also exposing laws and tests for free) and build a Scala Ordering when needed:
```
val scalaOrdering = catsOrderForPerson.toOrdering
```
key
is the function that returns the key for which the given ordering is defined
K
is the cats.Order type class instance that's going to be used for comparing elements
returns
the minimum element of the source stream, relative to its key generated by the given function and the given ordering
Definition Classes
Iterant
final def minL(implicit F: Sync[F], A: Order[B]): F[Option[B]]
Given a cats.Order over the stream's elements, returns the minimum element in the stream.
Given a cats.Order over the stream's elements, returns the minimum element in the stream.
Example:
```
import cats.implicits._
import monix.eval.Coeval

// Yields Some(3)
Iterant[Coeval].of(10, 7, 6, 8, 20, 3, 5).minL

// Yields None
Iterant[Coeval].empty[Int].minL
```
Cats Order and Scala Interop
Monix prefers to work with cats.Order for assessing the order of elements that have an ordering defined, instead of scala.math.Ordering.
We do this for consistency, as Monix is now building on top of Cats. This may change in the future, depending on what happens with typelevel/cats#2455.
Building a cats.Order is easy to do if you already have a Scala Ordering instance:
```
import cats.Order

case class Person(name: String, age: Int)

// Starting from a Scala Ordering
implicit val scalaOrderingForPerson: Ordering[Person] =
  new Ordering[Person] {
    def compare(x: Person, y: Person): Int =
      x.age.compareTo(y.age) match {
        case 0 => x.name.compareTo(y.name)
        case o => o
      }
  }

// Building a cats.Order from it
implicit val catsOrderForPerson: Order[Person] =
  Order.fromOrdering
```
You can also do that in reverse, so you can prefer cats.Order (due to Cats also exposing laws and tests for free) and build a Scala Ordering when needed:
```
val scalaOrdering = catsOrderForPerson.toOrdering
```
A
is the cats.Order type class instance that's going to be used for comparing elements
returns
the minimum element of the source stream, relative to the defined Order
Definition Classes
Iterant
final def ne(arg0: AnyRef): Boolean
Definition Classes
AnyRef
final def notify(): Unit
Definition Classes
AnyRef
Annotations
@native()
final def notifyAll(): Unit
Definition Classes
AnyRef
Annotations
@native()
final def onErrorHandle[B >: B](f: (Throwable) => B)(implicit F: Sync[F]): Iterant[F, B]
Returns an Iterant that mirrors the behavior of the source, unless the source is terminated with an error, in which case the streaming of events fallbacks to an iterant emitting a single element generated by the backup function.
Returns an Iterant that mirrors the behavior of the source, unless the source is terminated with an error, in which case the streaming of events fallbacks to an iterant emitting a single element generated by the backup function.
Example:
```
import monix.eval.Task
import monix.execution.exceptions.DummyException

val prefix = Iterant[Task].of(1, 2, 3, 4)
val suffix = Iterant[Task].raiseError[Int](DummyException("dummy"))
val fa = prefix ++ suffix

fa.onErrorHandle { _ => 5 }
```
See onErrorRecover for the version that takes a partial function as a parameter.
f
is a function that matches errors with a backup element that is emitted when the source throws an error.
Definition Classes
Iterant
final def onErrorHandleWith[B >: B](f: (Throwable) => Iterant[F, B])(implicit F: Sync[F]): Iterant[F, B]
Returns an Iterant that mirrors the behavior of the source, unless the source is terminated with an error, in which case the streaming of events continues with the specified backup sequence generated by the given function.
Returns an Iterant that mirrors the behavior of the source, unless the source is terminated with an error, in which case the streaming of events continues with the specified backup sequence generated by the given function.
Example:
```
import monix.eval.Task
import monix.execution.exceptions.DummyException

val prefix = Iterant[Task].of(1, 2, 3, 4)
val suffix = Iterant[Task].raiseError[Int](DummyException("dummy"))
val fa = prefix ++ suffix

fa.onErrorHandleWith {
  case _: DummyException =>
    Iterant[Task].pure(5)
  case other =>
    Iterant[Task].raiseError[Int](other)
}
```
See onErrorRecoverWith for the version that takes a partial function as a parameter.
f
is a function that matches errors with a backup throwable that is subscribed when the source throws an error.
Definition Classes
Iterant
final def onErrorIgnore(implicit F: Sync[F]): Iterant[F, B]
Returns a new Iterant that mirrors the source, but ignores any errors in case they happen.
Returns a new Iterant that mirrors the source, but ignores any errors in case they happen.
Definition Classes
Iterant
final def onErrorRecover[B >: B](pf: PartialFunction[Throwable, B])(implicit F: Sync[F]): Iterant[F, B]
Returns an Iterant that mirrors the behavior of the source, unless the source is terminated with an error, in which case the streaming of events fallbacks to an iterant emitting a single element generated by the backup function.
Returns an Iterant that mirrors the behavior of the source, unless the source is terminated with an error, in which case the streaming of events fallbacks to an iterant emitting a single element generated by the backup function.
The created Iterant mirrors the behavior of the source in case the source does not end with an error or if the thrown Throwable is not matched.
Example:
```
import monix.eval.Task
import monix.execution.exceptions.DummyException

val prefix = Iterant[Task].of(1, 2, 3, 4)
val suffix = Iterant[Task].raiseError[Int](DummyException("dummy"))
val fa = prefix ++ suffix

fa.onErrorRecover {
  case _: DummyException => 5
}
```
See onErrorHandle for the version that takes a total function as a parameter.
pf
- a function that matches errors with a backup element that is emitted when the source throws an error.
Definition Classes
Iterant
final def onErrorRecoverWith[B >: B](pf: PartialFunction[Throwable, Iterant[F, B]])(implicit F: Sync[F]): Iterant[F, B]
Returns an Iterant that mirrors the behavior of the source, unless the source is terminated with an error, in which case the streaming of events continues with the specified backup sequence generated by the given partial function.
Returns an Iterant that mirrors the behavior of the source, unless the source is terminated with an error, in which case the streaming of events continues with the specified backup sequence generated by the given partial function.
The created Iterant mirrors the behavior of the source in case the source does not end with an error or if the thrown Throwable is not matched.
Example:
```
import monix.eval.Task
import monix.execution.exceptions.DummyException

val prefix = Iterant[Task].of(1, 2, 3, 4)
val suffix = Iterant[Task].raiseError[Int](DummyException("dummy"))
val fa = prefix ++ suffix

fa.onErrorRecoverWith {
  case _: DummyException =>
    Iterant[Task].pure(5)
}
```
See onErrorHandleWith for the version that takes a total function as a parameter.
pf
is a function that matches errors with a backup throwable that is subscribed when the source throws an error.
Definition Classes
Iterant
final def parZip[B](rhs: Iterant[F, B])(implicit F: Sync[F], P: Parallel[F]): Iterant[F, (B, B)]
Lazily zip two iterants together, the elements of the emitted tuples being fetched in parallel.
Lazily zip two iterants together, the elements of the emitted tuples being fetched in parallel.
This is the parallel version of zip, the results are still ordered, but it can yield non-deterministic ordering of effects when fetching the elements of an emitted tuple.
rhs
is the other iterant to zip the source with (the right hand side)
Definition Classes
Iterant
final def parZipMap[B, C](rhs: Iterant[F, B])(f: (B, B) => C)(implicit F: Sync[F], P: Parallel[F]): Iterant[F, C]
Lazily zip two iterants together, in parallel, using the given function f to produce output values.
Lazily zip two iterants together, in parallel, using the given function f to produce output values.
This is like zipMap, except that the element pairs are processed in parallel (ordered results, but non-deterministic ordering of effects).
rhs
is the other iterant to zip the source with (the right hand side)
f
is the mapping function to transform the zipped (A, B) elements
Definition Classes
Iterant
def productElementNames: Iterator[String]
Definition Classes
Product
final def pushToChannel(channel: Producer[F, B])(implicit F: Sync[F]): F[Unit]
Consumes the source by pushing it to the specified channel.
Consumes the source by pushing it to the specified channel.
channel
is a ProducerF value that will be used for consuming the stream
Definition Classes
Iterant
final def reduceL(op: (B, B) => B)(implicit F: Sync[F]): F[Option[B]]
Reduces the elements of the source using the specified associative binary operator, going from left to right, start to finish.
Reduces the elements of the source using the specified associative binary operator, going from left to right, start to finish.
Example:
```
import monix.eval.Coeval

// Yields Some(10)
Iterant[Coeval].of(1, 2, 3, 4).reduceL(_ + _)

// Yields None
Iterant[Coeval].empty[Int].reduceL(_ + _)
```
op
is an associative binary operation that's going to be used to reduce the source to a single value
returns
either Some(value) in case the stream is not empty, value being the result of inserting op between consecutive elements of this iterant, going from left to right, or None in case the stream is empty
Definition Classes
Iterant
val release: (A, ExitCase[Throwable]) => F[Unit]

final def repeat(implicit F: Sync[F]): Iterant[F, B]

Repeats the items emitted by the source continuously

It terminates either on error or if the source is empty.

In case repetition on empty streams is desired, then combine with retryIfEmpty:

import monix.eval.Coeval
import scala.util.Random

val stream = Iterant[Coeval].suspend(Coeval {
  val nr = Random.nextInt()
  if (nr % 10 != 0)
    Iterant[Coeval].empty[Int]
  else
    Iterant[Coeval].of(1, 2, 3)
})

// Will eventually repeat elements 1, 2, 3
stream.retryIfEmpty(None).repeat

Definition Classes: Iterant

final def retryIfEmpty(maxRetries: Option[Int])(implicit F: Sync[F]): Iterant[F, B]
Retries processing the source stream after the search is detected as being empty.
Retries processing the source stream after the search is detected as being empty.
```
import monix.eval.Coeval
import scala.util.Random

val stream = Iterant[Coeval].suspend(Coeval {
  val nr = Random.nextInt()
  if (nr % 10 != 0)
    Iterant[Coeval].empty[Int]
  else
    Iterant[Coeval].of(1, 2, 3)
})

// Will eventually stream elements 1, 2, 3
stream.retryIfEmpty(None)
```
maxRetries
is an optional integer specifying a maximum number of retries before it gives up and returns an empty stream
Definition Classes
Iterant
final def scan[S](seed: => S)(op: (S, B) => S)(implicit F: Sync[F]): Iterant[F, S]
Applies a binary operator to a start value and all elements of this Iterant, going left to right and returns a new Iterant that emits on each step the result of the applied function.
Applies a binary operator to a start value and all elements of this Iterant, going left to right and returns a new Iterant that emits on each step the result of the applied function.
Similar to foldLeftL, but emits the state on each step. Useful for modeling finite state machines.
Example showing how state can be evolved and acted upon:
```
import monix.eval.Task

sealed trait State[+A] { def count: Int }
case object Init extends State[Nothing] { def count = 0 }
case class Current[A](current: A, count: Int) extends State[A]

// Whatever...
val source = Iterant[Task].range(0, 1000)

val scanned = source.scan(Init : State[Int]) { (acc, a) =>
  acc match {
    case Init => Current(a, 1)
    case Current(_, count) => Current(a, count + 1)
  }
}

scanned
  .takeWhile(_.count < 10)
  .collect { case Current(a, _) => a }
```
seed
is the initial state
op
is the function that evolves the current state
returns
a new iterant that emits all intermediate states being resulted from applying function op
Definition Classes
Iterant
See also
scan0 for the version that emits seed element at the beginning
final def scan0[S](seed: => S)(op: (S, B) => S)(implicit F: Sync[F]): Iterant[F, S]
Applies a binary operator to a start value and all elements of this Iterant, going left to right and returns a new Iterant that emits on each step the result of the applied function.
Applies a binary operator to a start value and all elements of this Iterant, going left to right and returns a new Iterant that emits on each step the result of the applied function.
This is a version of scan that emits seed element at the beginning, similar to scanLeft on Scala collections.
Definition Classes
Iterant
final def scanEval[S](seed: F[S])(op: (S, B) => F[S])(implicit F: Sync[F]): Iterant[F, S]
Applies a binary operator to a start value and all elements of this Iterant, going left to right and returns a new Iterant that emits on each step the result of the applied function.
Applies a binary operator to a start value and all elements of this Iterant, going left to right and returns a new Iterant that emits on each step the result of the applied function.
Similar with scan, but this can suspend and evaluate side effects in the F[_] context, thus allowing for asynchronous data processing.
Similar to foldLeftL and foldWhileLeftEvalL, but emits the state on each step. Useful for modeling finite state machines.
Example showing how state can be evolved and acted upon:
```
import monix.eval.Task

sealed trait State[+A] { def count: Int }
case object Init extends State[Nothing] { def count = 0 }
case class Current[A](current: Option[A], count: Int)
  extends State[A]

// Dummies
case class Person(id: Int, name: String, age: Int)
def requestPersonDetails(id: Int): Task[Option[Person]] = Task.delay(???)

// Whatever
val source = Iterant[Task].range(0, 1000)
// Initial state
val seed = Task.now(Init : State[Person])

val scanned = source.scanEval(seed) { (state, id) =>
  requestPersonDetails(id).map { a =>
    state match {
      case Init =>
        Current(a, 1)
      case Current(_, count) =>
        Current(a, count + 1)
    }
  }
}

scanned
  .takeWhile(_.count < 10)
  .collect { case Current(Some(a), _) => a }
```
seed
is the initial state
op
is the function that evolves the current state
returns
a new iterant that emits all intermediate states being resulted from applying the given function
Definition Classes
Iterant
See also
scan for the version that does not require using F[_] in the provided operator
scanEval0 for the version that emits seed element at the beginning
final def scanEval0[S](seed: F[S])(op: (S, B) => F[S])(implicit F: Sync[F]): Iterant[F, S]
Applies a binary operator to a start value and all elements of this Iterant, going left to right and returns a new Iterant that emits on each step the result of the applied function.
Applies a binary operator to a start value and all elements of this Iterant, going left to right and returns a new Iterant that emits on each step the result of the applied function.
This is a version of scanEval that emits seed element at the beginning, similar to scanLeft on Scala collections.
Definition Classes
Iterant
final def scanMap[B](f: (B) => B)(implicit F: Sync[F], B: Monoid[B]): Iterant[F, B]
Given a mapping function that returns a B type for which we have a cats.Monoid instance, returns a new stream that folds the incoming elements of the sources using the provided Monoid[B].combine, with the initial seed being the Monoid[B].empty value, emitting the generated values at each step.
Given a mapping function that returns a B type for which we have a cats.Monoid instance, returns a new stream that folds the incoming elements of the sources using the provided Monoid[B].combine, with the initial seed being the Monoid[B].empty value, emitting the generated values at each step.
Equivalent with scan applied with the given cats.Monoid, so given our f mapping function returns a B, this law holds:
stream.scanMap(f) <-> stream.scan(Monoid[B].empty)(Monoid[B].combine)
Example:
```
import cats.implicits._
import monix.eval.Task

// Yields 2, 6, 12, 20, 30, 42
Iterant[Task].of(1, 2, 3, 4, 5, 6).scanMap(x => x * 2)
```
f
is the mapping function applied to every incoming element of this Iterant before folding using Monoid[B].combine
returns
a new Iterant that emits all intermediate states being resulted from applying Monoid[B].combine function
Definition Classes
Iterant
See also
scanMap0 for the version that emits empty element at the beginning
final def scanMap0[B](f: (B) => B)(implicit F: Sync[F], B: Monoid[B]): Iterant[F, B]
Given a mapping function that returns a B type for which we have a cats.Monoid instance, returns a new stream that folds the incoming elements of the sources using the provided Monoid[B].combine, with the initial seed being the Monoid[B].empty value, emitting the generated values at each step.
Given a mapping function that returns a B type for which we have a cats.Monoid instance, returns a new stream that folds the incoming elements of the sources using the provided Monoid[B].combine, with the initial seed being the Monoid[B].empty value, emitting the generated values at each step.
This is a version of scanMap that emits seed element at the beginning.
Definition Classes
Iterant
final def sumL(implicit F: Sync[F], A: Numeric[B]): F[B]
Given evidence that type A has a scala.math.Numeric implementation, sums the stream of elements.
Given evidence that type A has a scala.math.Numeric implementation, sums the stream of elements.
An alternative to foldL which does not require any imports and works in cases cats.Monoid is not defined for values (e.g. A = Char)
Definition Classes
Iterant
final def switchIfEmpty(backup: Iterant[F, B])(implicit F: Sync[F]): Iterant[F, B]
In case this Iterant is empty, switch to the given backup.
In case this Iterant is empty, switch to the given backup.
Definition Classes
Iterant
final def synchronized[T0](arg0: => T0): T0
Definition Classes
AnyRef
final def tail(implicit F: Sync[F]): Iterant[F, B]
Drops the first element of the source iterant, emitting the rest.
Drops the first element of the source iterant, emitting the rest.
Example:
```
import monix.eval.Task

// Yields 2, 3, 4
Iterant[Task].of(1, 2, 3, 4).tail
```
returns
a new iterant that upon evaluation will emit all elements of the source, except for the head
Definition Classes
Iterant
final def take(n: Int)(implicit F: Sync[F]): Iterant[F, B]
Creates a new iterant that upon evaluation will select the first n elements from the source and then stop, in the order they are emitted by the source.
Creates a new iterant that upon evaluation will select the first n elements from the source and then stop, in the order they are emitted by the source.
Example:
```
import monix.eval.Task

// Yields 1, 2, 3
Iterant[Task].of(1, 2, 3, 4, 5, 6).take(3)
```
n
is the number of elements to take from this iterant
returns
a new iterant instance that on evaluation will emit only the first n elements of this iterant
Definition Classes
Iterant
final def takeEveryNth(n: Int)(implicit F: Sync[F]): Iterant[F, B]
Takes every n-th element, dropping intermediary elements and returns a new iterant that emits those elements.
Takes every n-th element, dropping intermediary elements and returns a new iterant that emits those elements.
Example:
```
import monix.eval.Task

// Yields 2, 4, 6
Iterant[Task].of(1, 2, 3, 4, 5, 6).takeEveryNth(2)

// Yields 1, 2, 3, 4, 5, 6
Iterant[Task].of(1, 2, 3, 4, 5, 6).takeEveryNth(1)
```
n
is the sequence number of an element to be taken (must be > 0)
returns
a new iterant instance that on evaluation will return only every n-th element of the source
Definition Classes
Iterant
final def takeLast(n: Int)(implicit F: Sync[F]): Iterant[F, B]
Creates a new iterable that only emits the last n elements emitted by the source.
Creates a new iterable that only emits the last n elements emitted by the source.
In case the source triggers an error, then the underlying buffer gets dropped and the error gets emitted immediately.
Example:
```
import monix.eval.Task

// Yields 1, 2, 3
Iterant[Task].of(1, 2, 3, 4, 5, 6).take(3)
```
n
is the number of elements to take from the end of the stream.
returns
a new iterant instance that on evaluation will emit the last n elements of the source
Definition Classes
Iterant
final def takeWhile(p: (B) => Boolean)(implicit F: Sync[F]): Iterant[F, B]
Takes longest prefix of elements that satisfy the given predicate and returns a new iterant that emits those elements.
Takes longest prefix of elements that satisfy the given predicate and returns a new iterant that emits those elements.
Example:
```
import monix.eval.Task

// Yields 1, 2, 3
Iterant[Task].of(1, 2, 3, 4, 5, 6).takeWhile(_ < 4)
```
p
is the function that tests each element, stopping the streaming on the first false result
returns
a new iterant instance that on evaluation will all elements of the source for as long as the given predicate returns true, stopping upon the first false result
Definition Classes
Iterant
final def takeWhileWithIndex(p: (B, Long) => Boolean)(implicit F: Sync[F]): Iterant[F, B]
Takes longest prefix of elements zipped with their indices that satisfy the given predicate and returns a new iterant that emits those elements.
Takes longest prefix of elements zipped with their indices that satisfy the given predicate and returns a new iterant that emits those elements.
Example:
```
import monix.eval.Task

// Yields 1, 2
Iterant[Task].of(1, 2, 3, 4, 5, 6).takeWhileWithIndex((_, idx) => idx != 2)
```
p
is the function that tests each element, stopping the streaming on the first false result
returns
a new iterant instance that on evaluation will all elements of the source for as long as the given predicate returns true, stopping upon the first false result
Definition Classes
Iterant
final def toChannel(implicit F: Concurrent[F], cs: ContextShift[F]): Channel[F, B]
Converts this Iterant to a monix.catnap.ChannelF.
Converts this Iterant to a monix.catnap.ChannelF.
Definition Classes
Iterant
final def toListL(implicit F: Sync[F]): F[List[B]]
Aggregates all elements in a List and preserves order.
Aggregates all elements in a List and preserves order.
Example:
```
import monix.eval.Task

// Yields List(1, 2, 3, 4)
Iterant[Task].of(1, 2, 3, 4).toListL
```
Note that this operation is dangerous, since if the iterant is infinite then this operation is non-terminating, the process probably blowing up with an out of memory error sooner or later.
Definition Classes
Iterant

final def toReactivePublisher(implicit F: Effect[F]): Publisher[B]

Converts this Iterant into an org.reactivestreams.Publisher.

Meant for interoperability with other Reactive Streams implementations. Also useful because it turns the Iterant into another data type with a push-based communication protocol with back-pressure.

Usage sample:

import monix.eval.Task
import monix.execution.rstreams.SingleAssignSubscription
import org.reactivestreams.{Publisher, Subscriber, Subscription}

def sum(source: Publisher[Int], requestSize: Int): Task[Long] =
  Task.create { (_, cb) =>
    val sub = SingleAssignSubscription()

    source.subscribe(new Subscriber[Int] {
      private[this] var requested = 0L
      private[this] var sum = 0L

      def onSubscribe(s: Subscription): Unit = {
        sub := s
        requested = requestSize
        s.request(requestSize)
      }

      def onNext(t: Int): Unit = {
        sum += t
        if (requestSize != Long.MaxValue) requested -= 1

        if (requested <= 0) {
          requested = requestSize
          sub.request(requestSize)
        }
      }

      def onError(t: Throwable): Unit =
        cb.onError(t)
      def onComplete(): Unit =
        cb.onSuccess(sum)
    })

    // Cancelable that can be used by Task
    sub
  }

// Needed for `Effect[Task]`
import monix.execution.Scheduler.Implicits.global

val pub = Iterant[Task].of(1, 2, 3, 4).toReactivePublisher

// Yields 10
sum(pub, requestSize = 128)

See the Reactive Streams for details.

Definition Classes: Iterant

final def uncons(implicit F: Sync[F]): Iterant[F, (Option[B], Iterant[F, B])]
Pull the first element out of this Iterant and return it and the rest.
Pull the first element out of this Iterant and return it and the rest. If the returned Option is None, the remainder is always empty.
The value returned is wrapped in Iterant to preserve resource safety, and consumption of the rest must not leak outside of use. The returned Iterant always contains a single element
```
import cats._, cats.implicits._, cats.effect._

 def unconsFold[F[_]: Sync, A: Monoid](iterant: Iterant[F, A]): F[A] = {
  def go(iterant: Iterant[F, A], acc: A): Iterant[F, A] =
    iterant.uncons.flatMap {
      case (None, _) => Iterant.pure(acc)
      case (Some(a), rest) => go(rest, acc |+| a)
    }

  go(iterant, Monoid[A].empty).headOptionL.map(_.getOrElse(Monoid[A].empty))
}
```
Definition Classes
Iterant
final def unsafeFlatMap[B](f: (B) => Iterant[F, B])(implicit F: Sync[F]): Iterant[F, B]
Applies the function to the elements of the source and concatenates the results.
Applies the function to the elements of the source and concatenates the results.
This variant of flatMap is not referentially transparent, because it tries to apply function f immediately, in case the Iterant is in a NextCursor or NextBatch state.
To be used for optimizations, but keep in mind it's unsafe, as its application isn't referentially transparent.
f
is the function mapping elements from the source to iterants
Definition Classes
Iterant
final def upcast[B >: B]: Iterant[F, B]
Explicit covariance operator.
Explicit covariance operator.
The Iterant type isn't covariant in type param A, because covariance doesn't play well with a higher-kinded type like F[_]. So in case you have an Iterant[F, A], but need an Iterant[F, B], knowing that A extends B, then you can do an upcast.
Example:
```
import monix.eval.Task

val source: Iterant[Task, List[Int]] = Iterant.suspend(???)

// This will trigger an error because of the invariance:
// val sequences: Iterant[Task, Seq[Int]] = source

// But this will work just fine:
val sequence: Iterant[Task, Seq[Int]] = source.upcast[Seq[Int]]
```
Definition Classes
Iterant
val use: (A) => F[Iterant[F, B]]
final def wait(): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException])
final def wait(arg0: Long, arg1: Int): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException])
final def wait(arg0: Long): Unit
Definition Classes
AnyRef
Annotations
@throws(classOf[java.lang.InterruptedException]) @native()
final def zip[B](rhs: Iterant[F, B])(implicit F: Sync[F]): Iterant[F, (B, B)]
Lazily zip two iterants together.
Lazily zip two iterants together.
The length of the result will be the shorter of the two arguments.
Example:
```
import monix.eval.Task

val lh = Iterant[Task].of(11, 12, 13, 14)
val rh = Iterant[Task].of(21, 22, 23, 24, 25)

// Yields (11, 21), (12, 22), (13, 23), (14, 24)
lh.zip(rh)
```
rhs
is the other iterant to zip the source with (the right hand side)
Definition Classes
Iterant
final def zipMap[B, C](rhs: Iterant[F, B])(f: (B, B) => C)(implicit F: Sync[F]): Iterant[F, C]
Lazily zip two iterants together, using the given function f to produce output values.
Lazily zip two iterants together, using the given function f to produce output values.
The length of the result will be the shorter of the two arguments.
Example:
```
import monix.eval.Task

val lh = Iterant[Task].of(11, 12, 13, 14)
val rh = Iterant[Task].of(21, 22, 23, 24, 25)

// Yields 32, 34, 36, 38
lh.zipMap(rh) { (a, b) => a + b }
```
rhs
is the other iterant to zip the source with (the right hand side)
f
is the mapping function to transform the zipped (A, B) elements
Definition Classes
Iterant
final def zipWithIndex(implicit F: Sync[F]): Iterant[F, (B, Long)]
Zips the emitted elements of the source with their indices.
Zips the emitted elements of the source with their indices.
The length of the result will be the same as the source.
Example:
```
import monix.eval.Task

val source = Iterant[Task].of("Sunday", "Monday", "Tuesday", "Wednesday")

// Yields ("Sunday", 0), ("Monday", 1), ("Tuesday", 2), ("Wednesday", 3)
source.zipWithIndex
```
Definition Classes
Iterant

Packages

Package Overview

Scope

final case class Scope[F[_], A, B](acquire: F[A], use: (A) => F[Iterant[F, B]], release: (A, ExitCase[Throwable]) => F[Unit]) extends Iterant[F, B] with Product with Serializable

Instance Constructors

Value Members

Cats Eq and Scala Interop

Cats Eq and Scala Interop

Cats Order and Scala Interop

Cats Order and Scala Interop

Cats Order and Scala Interop

Cats Order and Scala Interop

Inherited from Iterant[F, B]

Inherited from Serializable

Inherited from Product

Inherited from Equals

Inherited from AnyRef

Inherited from Any

Ungrouped

Packages

Package Overview

Scope

final case class Scope[F[_], A, B](acquire: F[A], use: (A) => F[Iterant[F, B]], release: (A, ExitCase[Throwable]) => F[Unit]) extends Iterant[F, B] with Product with Serializable

Instance Constructors

Value Members

Cats Eq and Scala Interop

Cats Eq and Scala Interop

Cats Order and Scala Interop

Cats Order and Scala Interop

Cats Order and Scala Interop

Cats Order and Scala Interop

Inherited from Iterant[F, B]

Inherited from Serializable

Inherited from Product

Inherited from Equals

Inherited from AnyRef

Inherited from Any

Ungrouped

Scope